Chlorinated Polyethylene
CPE 135 A
It is chloridized by HDPE. Due to the molecule of CPE does not contain double bond, it has excellent weatherability, anti-flaming and wide application. It is mainly used as PVC impact modifier.
| Technical Data | |
| Appearance: | White flowing powder |
| Whiteness (E457): | ≥ 860 |
| Chlorine Content: | 35 ± 1 % |
| Heat of Fusion: | ≤ 2.0 J/g |
| Volatiles Content: | ≤ 0.40 % |
| Sieve Remainder (0.9 mm Sieve): | ≤ 2.0 % |
| Impurity Particles: | ≤ 30 Piece/100g |
| Tensile Strength: | ≥ 8.0 Mpa |
| Elongation at Break: | ≥ 600 % |
| Shore Hardness: | ≤ 65 Shore A |
Package and storage: Packed in plastic weaved bag, lined with a PE bag, 25kg in weight. It should be stored in a cool and dry place with good ventilation. The expiring date is 12 months from the date produced, but can be used if passed in an examination after 12 month.
Product performance:
It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine atoms, the crystallization of HDPE was destroyed and becomes soft and full of rubber property. Because of the presence of chlorine atom, CPE turns into polar polymers and has the same polar groups as PVC. Under this situation, it increases the compatibility of PVC. In addition, it can blend with PE, PS and rubber to improve its physical properties.
Application:
It is applicable for PVC profile, non-conventional PVC, PVC pipe, PVC pipe fittings. It is also used for the soft products together with PVC, EVA or paracril.